Testing and comparing different Peltier coolers - Part 5 - TEC12710

In this video, I am testing the TEC12710 Peltier cooler. First, I measure the Imax 50%, then I map the temperature-current values across several points. Then, I determine the Tmin-Imax values (minimum temperature achieved before the Joule effect overpowering the Peltier effect). Finally, I put a thermal load on the cold side (another CPU cooler) and check the cold side temperature.

Previous
Previous

Testing and comparing different Peltier coolers - Part 6 - TEC12715

Next
Next

Testing and comparing different Peltier coolers - Part 4 - TEC12708